prg series ? high current ssr rated to 150a @ 48-660 vac ? scr output for heavy industrial loads ? ac or dc control ? zero-crossin g ( resistive loads ) or random-fire ( inductive loads ) out p u t product selection control voltage 150a 150a 150a 3-15 vdc prgd24150 90-140 vac PRGA24150 prga48150 prga60150 4-15 vdc prgd48150 prgd60150 available options output specifications (1) description operating voltage (47-63hz) [vrms] 24-280 48-530 48-660 transient overvoltage [vpk] 600 1200 1200 maximum off-state leakage current @ rated voltage [marms] 5.0 5.0 1.0 minimum off-state dv/dt @ maximum rated voltage [v/sec] (2) 500 500 500 maximum load current (3) [arms] 150 150 150 minimum load current [arms] 0.15 0.15 0.15 maximum surge current (16.6ms) [apk] 1750 1750 1750 maximum on-state voltage drop @ rated current [vpk] 1.7 1.7 1.7 thermal resistance juncti on to case (rjc) [c/w] 0.15 0.15 0.15 maximum i 2 t for fusing (8.3 msec) [a 2 sec] 12700 12700 12700 minimum power factor (with maximum load) 0.5 0.5 0.5
input specifications (1) description 240 v models 480 v models control voltage range 3-15 vdc 4-15 vdc 90-140 vrms maximum turn-on voltage 3.0 vdc 4.0 vdc 90 vrms minimum turn-off voltage 1.0 vdc 1.0 vdc 10 vrms typical input current 15 ma @5 vdc 15 ma @ 5 vdc 10 ma @ 120 vac nominal input impedance 300 ohm 300 ohm 14.1 k ohm maximum turn-on time [msec] (4) 1/2 cycle 1/2 cycle 10 maximum turn-off time [msec] 1/2 cycle 1/2 cycle 40 general specifications description parameters dielectric strength, input/output/base (50/60hz) 4000 vrms minimum insulation resistance (@ 500 v dc) 10 9 ohm maximum capacitance, input/output 10 pf ambient operating temperature range -30 to 80 c ambient storage temperature range -40 to 125 c weight (typical) 12 oz (340g) encapsulation thermally conductive epoxy power terminals: ms screws furnished, mounted control terminals: .050 x .020 square pins general notes 1) all p ara meters at 25 c u nl ess othe rwise speci fi ed. 2) off-sta te dv/dt te st m etho d pe r eia/nar m stan da rd rs-4 43 , p ar agrap h 13 .11.1 3) h eat sink ing r eq uir ed , for der ating curve s se e pa ge 2. 4) tu rn -on ti me for ra nd om tur n-o n ve rsio ns is 0.02 m sec (dc contro l mod els)
mechanical specifications thermal derate information agency approvals rev. 121710
annex - enviromental information
|
